Opel Astra A

1991-1998 of release

Repair and operation of the car



Opel Astra A
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Ventilation and heating
+ 5. Power supply system
+ 6. System of decrease in toxicity
+ 7. Coupling
+ 8. Transmissions
+ 9. Half shafts
+ 10. Brake system
+ 11. Suspension bracket and steering
- 12. Body
   12.1. Technical characteristics
   12.2. Maintenance and repair of a body
   12.3. Vinyl finishing
   12.4. Upholstery and rugs
   12.5. Repair of insignificant damages
   12.6. Repair of considerable damages
   12.7. Front and rear bumper
   12.8. Front grille
   12.9. The water taking away panel before a windshield
   12:10. Cowl
   12:11. Cowl loops
   12:12. Lock elements
   12:13. Rope of opening of a cowl
   12:14. Doors
   12:15. Internal handle of opening of a door
   12:16. External handle of opening of a door
   12:17. Locks of doors
   12:18. Drum of the lock of a forward door
   12:19. Lock clamp
   12:20. Door glass
   12:21. Window regulator mechanism
   12:22. A trunk lid (models with a body like "Sedan")
   12:23. Trunk lid loops
   12:24. Trunk lid elements
   12:25. Back door
   12:26. Loops of a back door
   12:27. Elements of a back door
   12:28. Elements of the central lock
   12:29. Elements of power windows
   12:30. Rear-view mirror
   12:31. Glass of a rear-view mirror
   12:32. Elements of rear-view mirrors with the electric drive
   12:33. Internal rear-view mirror
   12:34. Front and back glass
   12:35. Back triangular glasses
   12:36. Panel of the top hatch
   12:37. Elements of the top hatch
   12:38. Panels of wheel niches
   12:39. Protective guard of the engine
   12:40. Gate of a jellied mouth of the fuel tank
   12:41. Back spoilers
   12:42. External elements of finishing of a body
   12:43. Side decorative panels and additional spoilers
   12:44. Sitting lobbies
   12:45. Back sitting
   12:46. Natyazhiteli of seat belts of front seats
   12:47. Seat belts
   12:48. Regulators of height of seat belts
   12:49. Internal panels of finishing
   12:50. Carpets
   12:51. Upholstery of a ceiling of salon
   12:52. Internal panels of finishing
   12:53. Panels of finishing of a luggage carrier, back door and trunk lid
   12:54. Central console
   12:55. Central panel of finishing of the dashboard
   12:56. Casings of a steering column
   12:57. Panel of finishing of an instrument guard
   12:58. Glove compartment
   12:59. Drum of the lock of a glove compartment
   12.60. Lower expostulated finishings under the dashboard
   12.61. Dashboard
+ 13. Electric equipment
+ 14. Electrical circuitries







12:52. Internal panels of finishing

FORWARD DOORS

Removal

PERFORMANCE ORDER
1. Disconnect a wire of the minus plug of the accumulator.
2. Remove a cap from the button of closing of a door and remove the button.
3. Remove the window regulator handle.
4. Remove the handle of adjustment of a rear-view mirror and remove the panel of finishing of a mirror.
5. Remove the switch of the drive of a rear-view mirror, the window regulator switch. Turn off the top fixing screw of the panel of finishing.
6. Turn off five fixing screws of the panel of finishing.
7. Release fixing rivets and remove the finishing panel.
8. Disconnect connection sockets if it is necessary.
9. Remove plastic foil.

Installation

Installation is carried out upside-down removals.

BACK DOORS

Removal

PERFORMANCE ORDER
1. Remove the button of closing of a door and the handle of a window regulator (the arrow specified a fixing clip).
2. Remove the panel of finishing of the handle of a door.
3. Remove the finishing panel in the bottom back corner of a window.
4. Turn off four fixing screws and remove the panel of finishing of a door.

Installation

Installation is carried out upside-down removals.

THE LOWER SIDE PANEL OF FINISHING UNDER THE DASHBOARD

Removal

PERFORMANCE ORDER
1. Turn off fixing screws.
2. Remove the finishing panel.

Installation

Installation is carried out upside-down removals.

THE BACK SIDE PANEL OF FINISHING (EXCEPT MODELEYS A 3-DOOR BODY LIKE "HATCHBACK")

Removal and installation

PERFORMANCE ORDER
1. Put back sitting forward.
2. Turn off two fixing screws and remove the finishing panel.
3. Installation is carried out upside-down removals.

THE LOWER SIDE PANEL OF FINISHING SIDEWAYS BACK SITTING (MODEL WITH A 3-DOOR BODY LIKE "HATCHBACK")

Removal

PERFORMANCE ORDER
1. Turn off two back fixing screws.
2. Turn off a bolt of the lower fastening of a seat belt.
3. Remove a seat belt guide.
4. Put back sitting forward.
5. Turn off two fixing screws.
6. Remove the finishing panel.

Installation

Installation is carried out upside-down removals.

PANEL OF FINISHING OF THE FORWARD RACK

Removal and installation

PERFORMANCE ORDER
1. Remove a cap and turn off the top fixing screw.
2. Remove the finishing panel, having released two rivets (1 – the screw and a cap, 2 – rivets).
3. Installation is carried out upside-down removals.

THE LOWER PANEL OF FINISHING OF THE AVERAGE RACK (EXCEPT MODELS WITH A 3-DOOR BODY LIKE "HATCHBACK")

Removal and installation

PERFORMANCE ORDER
1. Remove a cap and turn off the forward fixing screw of the back side panel of finishing.
2. Remove consolidations of doors from an edge of an average rack.
3. Remove the finishing panel from a rack, having released rivets.
4. Installation is carried out upside-down removals.

THE TOP PANEL OF FINISHING OF THE AVERAGE RACK (EXCEPT MODELS WITH A 3-DOOR BODY LIKE "HATCHBACK")

Fastenings of the top panel of finishing of an average rack – all models, except models with a 3-door body like "Hatchback"

1 – fixing screw;
2 – bolt of the top fastening of a seat belt;
3 – consolidations;
4 – fixing screws

Removal and installation

PERFORMANCE ORDER
1. Remove the lower panel of finishing of an average rack.
2. Remove the top fastening of a seat belt.
3. Remove caps and turn off two fixing screws.
4. Remove the finishing panel.
5. Installation is carried out upside-down removals.

THE TOP PANEL OF FINISHING OF THE AVERAGE RACK (MODEL WITH A 3-DOOR BODY LIKE "HATCHBACK")

Fastenings of the top panel of finishing of an average rack – model with a 3-door body like "Hatchback"

1 – bolt of the top fastening of a seat belt;
2 – hook;
3 – handle;
4 – fixing screws;
5 – rivet

Removal

PERFORMANCE ORDER
1. Remove the lower side panel of finishing sideways of back sitting.
2. Remove the top fastening of a seat belt.
3. Turn off two fixing screws and remove the handle on a ceiling.
4. Turn off the fixing screw and remove a hook for clothes.
5. Turn off the lower fixing screw and remove the finishing panel.

Installation

Installation is carried out upside-down removals.

THE BACK SIDE PANEL OF FINISHING (MODEL WITH A 3-DOOR BODY LIKE "HATCHBACK")

Removal

PERFORMANCE ORDER
1. Remove the lower side panel of finishing sideways of back sitting.
2. Remove consolidation of a door.
3. Remove a cap and turn off the back fixing screw.
4. Remove the finishing panel, having released rivets (are specified by shooters.

Installation

Installation is carried out upside-down removals.

THE BASIC PANEL OF THE BACK SHELF
(MODEL WITH A 3-DOOR BODY LIKE "HATCHBACK")

Removal and installation

PERFORMANCE ORDER
1. Remove the back shelf and put a back of back sitting.
2. Disconnect wires from the loudspeaker.
3. Turn off fixing screws and remove the panel.
4. Installation is carried out upside-down removals.

THE PANEL OF FINISHING OF THE BACK TRIANGULAR WINDOW (MODEL WITH THE BODY LIKE "SEDAN")

Removal

PERFORMANCE ORDER
1. Put a back of back sitting.
2. Remove the top fastening of a seat belt.
3. Remove consolidation of a back door.
4. Turn off three fixing screws (are specified by shooters).
5. Remove the finishing panel, having released latches (are specified by shooters).

Installation

Installation is carried out upside-down removals.

THE PANEL OF FINISHING OF THE BACK RACK (MODEL WITH A 3-DOOR BODY LIKE "HATCHBACK")

Removal and installation

PERFORMANCE ORDER
1. Remove the top fastening of a seat belt.
2. Remove consolidation of a back door.
3. Turn off three fixing screws and remove the finishing panel (the 1-top fastening of a seat belt, 2 – fixing screws).
4. Installation is carried out upside-down removals.

THE PANEL OF FINISHING OF THE BACK RACK (MODEL WITH A 5-DOOR BODY LIKE "HATCHBACK")

Removal

PERFORMANCE ORDER
1. Remove the back shelf and put a back of back sitting.
2. Remove the top fastening of a seat belt.
3. Remove consolidations from the finishing panel.
4. Disconnect loudspeaker wires.
5. Turn off fixing screws (are specified by shooters) and remove the finishing panel.
6. Remove the finishing panel, having released latches.

Installation

Installation is carried out upside-down removals.

THE PANEL OF FINISHING OF THE BACK RACK (MODEL WITH THE BODY LIKE "STATION WAGON")

Removal

PERFORMANCE ORDER
1. Put a back of back sitting.
2. Remove the top fastening of a seat belt.
3. Remove consolidations from the finishing panel.
4. Turn off fixing screws and remove the finishing panel (1 – fixing screws, 2 rivets).

Installation

Installation is carried out upside-down removals.