Opel Astra A

1991-1998 of release

Repair and operation of the car



Opel Astra A
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Ventilation and heating
+ 5. Power supply system
+ 6. System of decrease in toxicity
+ 7. Coupling
+ 8. Transmissions
+ 9. Half shafts
+ 10. Brake system
+ 11. Suspension bracket and steering
- 12. Body
   12.1. Technical characteristics
   12.2. Maintenance and repair of a body
   12.3. Vinyl finishing
   12.4. Upholstery and rugs
   12.5. Repair of insignificant damages
   12.6. Repair of considerable damages
   12.7. Front and rear bumper
   12.8. Front grille
   12.9. The water taking away panel before a windshield
   12:10. Cowl
   12:11. Cowl loops
   12:12. Lock elements
   12:13. Rope of opening of a cowl
   12:14. Doors
   12:15. Internal handle of opening of a door
   12:16. External handle of opening of a door
   12:17. Locks of doors
   12:18. Drum of the lock of a forward door
   12:19. Lock clamp
   12:20. Door glass
   12:21. Window regulator mechanism
   12:22. A trunk lid (models with a body like "Sedan")
   12:23. Trunk lid loops
   12:24. Trunk lid elements
   12:25. Back door
   12:26. Loops of a back door
   12:27. Elements of a back door
   12:28. Elements of the central lock
   12:29. Elements of power windows
   12:30. Rear-view mirror
   12:31. Glass of a rear-view mirror
   12:32. Elements of rear-view mirrors with the electric drive
   12:33. Internal rear-view mirror
   12:34. Front and back glass
   12:35. Back triangular glasses
   12:36. Panel of the top hatch
   12:37. Elements of the top hatch
   12:38. Panels of wheel niches
   12:39. Protective guard of the engine
   12:40. Gate of a jellied mouth of the fuel tank
   12:41. Back spoilers
   12:42. External elements of finishing of a body
   12:43. Side decorative panels and additional spoilers
   12:44. Sitting lobbies
   12:45. Back sitting
   12:46. Natyazhiteli of seat belts of front seats
   12:47. Seat belts
   12:48. Regulators of height of seat belts
   12:49. Internal panels of finishing
   12:50. Carpets
   12:51. Upholstery of a ceiling of salon
   12:52. Internal panels of finishing
   12:53. Panels of finishing of a luggage carrier, back door and trunk lid
   12:54. Central console
   12:55. Central panel of finishing of the dashboard
   12:56. Casings of a steering column
   12:57. Panel of finishing of an instrument guard
   12:58. Glove compartment
   12:59. Drum of the lock of a glove compartment
   12.60. Lower expostulated finishings under the dashboard
   12.61. Dashboard
+ 13. Electric equipment
+ 14. Electrical circuitries







12:20. Door glass

FORWARD DOORS

Removal

PERFORMANCE ORDER
1. Remove the internal panel of finishing of a door and plastic foil.

2. Remove glass consolidations (a photo at the left – outer side of glass of a forward door, photo on the right – inside).

3. Remove a back guide of glass.

4. Lower glass.

5. Remove a plastic emphasis from a glass guide.

6. Turn off two fixing bolts and remove the lower guide of glass.
7. Remove glass.

Installation

Installation is carried out upside-down removals.

BACK DOORS (MODELS WITH THE BODY LIKE "SEDAN AND "HATCHBACK")

Removal

PERFORMANCE ORDER
1. Completely lower glass, then remove the panel of finishing of a door and plastic foil.
2. Remove consolidations of glass from internal and outer side.
3. Remove a back guide of glass, having turned off top (1) and the lower (2) fixing bolt.
4. Accurately remove glass.

Installation

Installation is carried out upside-down removals.

THE FALLING GLASS OF THE BACK DOOR (MODEL WITH THE BODY LIKE "STATION WAGON")

Fastenings of a back guide of glass of a back door – model with a body like "Station wagon"

1 – fixing rivets of a window regulator;

2 – screws;

3 – nut and bolt

Removal

PERFORMANCE ORDER
1. Remove back glass.
2. Remove the window regulator mechanism.
3. Turn off fixing screws of a back guide, then turn off a fixing bolt and a nut and remove a back guide.
4. Remove glass.

Installation

Installation is carried out upside-down removals.

MOTIONLESS GLASS OF THE BACK DOOR (MODEL WITH THE BODY LIKE "STATION WAGON")

Removal

PERFORMANCE ORDER
1. Remove the falling glass.
2. Incline motionless glass forward and remove it from a door.

Installation

Installation is carried out upside-down removals.