Opel Astra A

1991-1998 of release

Repair and operation of the car



Opel Astra A
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Ventilation and heating
+ 5. Power supply system
+ 6. System of decrease in toxicity
+ 7. Coupling
+ 8. Transmissions
+ 9. Half shafts
+ 10. Brake system
- 11. Suspension bracket and steering
   11.1. Technical characteristics
   11.2. Rack of a forward suspension bracket
   11.3. Hug bearing of a forward wheel
   11.4. Lower lever of a forward suspension bracket
   11.5. Plugs of the lever of a forward suspension bracket
   11.6. Spherical hinge of the lower lever of a forward suspension bracket
   11.7. Stabilizer of cross stability
   11.8. Plugs of forward fastenings of the stabilizer of cross stability
   11.9. Cross-piece of a forward suspension bracket
   11:10. Nave of a back wheel
   11:11. Shock-absorber of a back suspension bracket
   11:12. Plugs of fastenings of the shock-absorber of a back suspension bracket
   11:13. Spring of a back suspension bracket
   11:14. Stabilizer(s) of cross stability of a back suspension bracket
   11:15. Back axis and levers of a suspension bracket
   11:16. Plugs of levers of a back suspension bracket
   11:17. System of adjustment of height of a back suspension bracket
   11:18. Elements of system of adjustment of height of a back suspension bracket
   11:19. Steering wheel
   11:20. Lock of a steering column
   11:21. Steering column
   11:22. Flexible rubber connection of a shaft of a steering column
   11:23. Rubber covers of the steering mechanism
   11:24. Steering mechanism
   11:25. Pump of system of hydrostrengthening of steering
   11:26. Tank of hydraulic liquid
   11:27. Hydraulic tubes of system of hydrostrengthening of steering
   11:28. Tip / spherical hinge of steering draft
   11:29. Steering drafts
   11:30. Adjustment of angles of installation of wheels
   11:31. Wheels and tires
+ 12. Body
+ 13. Electric equipment
+ 14. Electrical circuitries







11.8. Plugs of forward fastenings of the stabilizer of cross stability

Removal and installation

PERFORMANCE ORDER
1. Remove the stabilizer of cross stability.
2. If the plug demands replacement, it is necessary to replace all connecting link of the stabilizer.
3. For removal of a connecting link clamp a bar of the stabilizer of cross stability in a vice and remove a connecting link by means of the tool for division of spherical hinges.
4. After removal of connecting links it is possible to replace plugs of fastening of the stabilizer of cross resistance to a cross-piece.

5. Install new connecting links on the stabilizer of cross stability in the situation shown in the drawing (the sizes are given in millimeters).
6. Before installation of the stabilizer of cross stability check a condition of plugs of fastening of the stabilizer of cross resistance to levers of a suspension bracket and replace them if it is necessary.
7. Install the stabilizer of cross stability on the car.