Opel Astra A

1991-1998 of release

Repair and operation of the car



Opel Astra A
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Ventilation and heating
+ 5. Power supply system
+ 6. System of decrease in toxicity
+ 7. Coupling
+ 8. Transmissions
+ 9. Half shafts
+ 10. Brake system
- 11. Suspension bracket and steering
   11.1. Technical characteristics
   11.2. Rack of a forward suspension bracket
   11.3. Hug bearing of a forward wheel
   11.4. Lower lever of a forward suspension bracket
   11.5. Plugs of the lever of a forward suspension bracket
   11.6. Spherical hinge of the lower lever of a forward suspension bracket
   11.7. Stabilizer of cross stability
   11.8. Plugs of forward fastenings of the stabilizer of cross stability
   11.9. Cross-piece of a forward suspension bracket
   11:10. Nave of a back wheel
   11:11. Shock-absorber of a back suspension bracket
   11:12. Plugs of fastenings of the shock-absorber of a back suspension bracket
   11:13. Spring of a back suspension bracket
   11:14. Stabilizer(s) of cross stability of a back suspension bracket
   11:15. Back axis and levers of a suspension bracket
   11:16. Plugs of levers of a back suspension bracket
   11:17. System of adjustment of height of a back suspension bracket
   11:18. Elements of system of adjustment of height of a back suspension bracket
   11:19. Steering wheel
   11:20. Lock of a steering column
   11:21. Steering column
   11:22. Flexible rubber connection of a shaft of a steering column
   11:23. Rubber covers of the steering mechanism
   11:24. Steering mechanism
   11:25. Pump of system of hydrostrengthening of steering
   11:26. Tank of hydraulic liquid
   11:27. Hydraulic tubes of system of hydrostrengthening of steering
   11:28. Tip / spherical hinge of steering draft
   11:29. Steering drafts
   11:30. Adjustment of angles of installation of wheels
   11:31. Wheels and tires
+ 12. Body
+ 13. Electric equipment
+ 14. Electrical circuitries







11:14. Stabilizer(s) of cross stability of a back suspension bracket

GENERAL INFORMATION

Prevention

At installation it is necessary to use new fixing nuts and bolts.


MAIN STABILIZER OF CROSS STABILITY

Removal and installation


PERFORMANCE ORDER
1. Turn off fixing nuts at the edges of the stabilizer of cross stability, holding fixing bolts.
2. Remove the plug of fastening of the stabilizer of cross stability from the middle of a back axis (the arrow specified the isolating laying of the stabilizer).
3. Remove the stabilizer of cross stability from the car.
4. Installation is carried out upside-down removals.

THE ADDITIONAL STABILIZER OF CROSS STABILITY (IF IT IS ESTABLISHED)

Removal and installation


PERFORMANCE ORDER
1. Turn off four fixing bolts – two on each of the parties of the stabilizer of cross stability (are specified by shooters) and remove the stabilizer.

2. Installation is carried out upside-down removals.